This is a demo store. Any orders placed through this store will not be honored or fulfilled.

test

Last Updated :Sat, Dec 21, 2024

 

<< Back To All Categories
All Machines   >   Milling Machines  >   Vertical (Bridgeport Type)
10" x 50" Used Sharp Vertical Mill With DRO, Mdl. TMV1, Sony 2 Axis DRO Model LH51-2, Meehanite Casting, Cross Power Feed, Knee Power Feed, Longitudinal Power Feed, One Shot Lube System, Box Ways, Made In Taiwan, #A2813

Used Sharp Heavy Duty Vertical Milling Machine
Stock No: #A2813
Manufacturer: Sharp
Model: TMV1
Capacity: 10" x 50"
Condition: Used Machinery
Section 179
Click to view similar machines

Availability: Sold

English Video

Additional information:

Information From The Manufacturer:

 

Head 
  • To dissipate heat in the 5 HP motor driven head, a pair of high output fans is installed. This allows the machine to work demanding jobs for extended periods without damaging the motor, belts and bearings. A unique SHARP feature.
  • The motor shaft and Vari Drive pulleys are dynamically balanced, then hard-chromed. This allows a vibration free milling even at high speed
 
  • Since the Vari-speed drive system is operated by sliding the Vari Drive pulley up and down the motor shaft. The motor shaft is therefore chrome-plated, and has an oil channel that is fed by a grease fitting on the lower end for self-lubricating purpose. This ensures the sliding motion is trouble free at all times. A unique SHARP feature.
  • The motor shaft that drives the pulley and the spindle is subject to a lot of lateral stress. A roller bearing is installed for the lower support of the motor shaft. A unique SHARP feature.
  • Beside swiveling 90 degree side to side, the head can also swivel up and down by virtue of a knuckle joint design. The new design developed by Sharp uses 6 bolts, 3 each side, that fitted into a circular T-slot milled at the inside of the over arm and secured by nuts from the outside. It secured the head tightly and offered high accuracy in milling operations.
  • A matched pair of super-precision ABEC-7 angular contact bearings supports the spindle. The quill is CNC-ground to a mirror finish, and then chromed to fit the housing. Together, they insure spindle run out of no more than 0.00002” TIR- the best in the industry.
 
Column, Table and Knee 
  • Hardened and ground box ways on column and saddle.
  • Turcite coated slideways for better resistance to wear and retention of lube oil.
 
  • Certified MEEHANITE castings are used for superior rigidity and better dampening of vibrations.
 
  • Table and saddle backlash is controlled by a double-nut design that keeps the feed screw in contact with a pair of bronze nut at all times. A unique SHARP feature.
  • Hardened leadscrews on table and saddle for better resistance to wear.
 
  • The end of the table and saddle are mounted with thrust bearings that pre-load the feed screw, eliminating endplay for precisely controlled lateral movement.
  • Instead of hand scraping the top of the knee ways for oil retention, the matching underside of the saddle is hand-scraped. This extra step avoids having chips and dirt embedded in the knee ways and damages the sliding area.

 

  • Similar Machines
  • New
  • Used
  • OEM Brochure
  • Shipping
  • Manufacturer
Similar Machines New Used OEM Brochure Shipping Manufacturer

* Temporary specifications subject to verification.

   All quotations subject to prior sale.

© Sterling Machinery 1998-2016
Find Machinery Across the United States