Additional information:

Control Specifications  -  Fanuc OiM-D Conversational Control

8.4” color LCD screen

Color graphics

Simultaneous Controlled Axis

Least input Increment on X, Y, and Z is .001 mm

Least command increment on X, Y, and Z is .001mm

Inch/Metric Conversion (G20/G21)

Interlock on Each Axis/ All Axes

Machine Lock on All Axes

Emergency Stop

Stored Stroke Check 1,2,3,

Mirror Image

Follow-up

Servo Off

Backlash Compensation

Position Switch

Unexpected disturbance torque detection

Stored pitch compensation

Automatic Operation (Memory)

MDI Operation

Search Function (Sequence, Program)

Program restart

Dry Run

Single Block

Buffer Register

Manual Handle Interrupt

Manual Jog Feed  (Rapid, Jog, Handle)

Manual Handle Feed Rate (x1, x10, x100)

Feed Command (F Code Feedrate Direct Command)

Feedrate Override 0-200% (10% Unit)

Jog feed 0-5,000 mm/min (197 ipm)

Rapid traverse override (F0, F25%, F50%, F100%)

Override Cancel

Rapid Traverse Bell-Shaped Acceleration/Deceleration

Auto Corner Deceleration

Label Skip

Control in/Out

Nano Interpolation (G00/G01/G02/G03)

Exact Stop Mode / Exact Stop (G61/G09)

Dwell  (G04)

Helical Interpolation

Threading/Synchronous Feed

Manual Reference Point Return

1st Reference Point Return  G28

Reference Point Return Check G27

2nd Reference Point Check  G30

3rd and 4th Reference Point Return

Program stop/end   M00, M01, M02, M30

Tape Code  EIA RS-244/ISO 840 (Automatic Recognition)

Optional Block Skip (9 ea)

Maximum Programmable Dimensions +/-  9999.9999”  (+/- 8 digits)

Program Number O4 Digit

Absolute and Incremental Command  G90/G91

Control Specifications  -  Fanuc OiM-D Conversational Control (cont’d)

Decimal Point Input

Plane Selection   G17. G18. G19

Work Coordinate System Setting (G52 – G59)

Work Coordinate Preset

Additional Work Coordinate System   48 pairs

Manual Absolute  “On” fixed

Programmable Data Input   G10

Sub Program Call  4 Levels of Nesting

Custom Macro   #100 to #199

Addition to Custom Macro Common Variables  #500 to #999

Circlar Interpolation by radius R

Canned Cycle  (G73,G74, G76, G80 ~ G89)

Optional Chamfering / Corner R

Skip Function (G31)

Automatic Coordinate System Setting

Coordinate System Rotation

Programmable Mirror Image

Single direction positioning (G60)

External Data Input (Tool Offset, message, machine zero point shift)

Cylindrical interpolation

A1 Advance Preview Control (G5.1)

Polar Coordinate Command

Miscellaneous Function (M3 digits)

Miscellaneous Function Lock

Spindle Speed Command (S5 Digits, binary output)

Spindle Speed Override (50% ~ 120%) 10% Unit

Spindle Orientation

Rigid Tapping

Tool Function (Max T8 Digits)

Cutter Compensation C  (G40-G42)

Tool Length Measurement

Tool Length Compensation (G43, G44, G49)

Tool Offset Amount (+/- 6 Digits)

Tool Offset Pairs  (400 Pairs)

Tool Life Management

Reader/Puncher Interface RS232C

Memory Card input/output

Embedded Ethernet (100 Mbps)

Part Program Storage Length: 320M

Registered Programs 400 ea

Memory Lock

Back Ground Editing

Extended Part Program Editing (Copy, Move, Change of NC Program)

Self Diagnosis Function

History Display of Alarm and Operator Message

Help Function

Run Hour / Parts Count Display

Actual Cutting Feedrate Display

Spindle / Servo Setting Screen

Multi-language display (Selection of 5 Optional Language)

Erase CRT Screen Display (Screen Saver)

Bi-Direction Pitch Error Compensation

Nano Smoothing

Spindle Control with Servo Motor

Tool Management Function

Protection of Data at 8-Levels

Tool Monitoring Function (HWTM – Built-on Fanuc Type)

Fanuc Manual Guide i conversational programming

Alpha i AC digital servo system with 1,000,000 pulse encoders

Full MDI keyboard

PCMCIA data card slot on left side of LCD for program input / output – up to 2GB storage

Advanced Preview Control (Look ahead of multi-blocks – 20 blocks look ahead)

Automatic Acceleration / deceleration with Bell Shaped rapid acc / dec

3 axes simultaneous control std. (4 axis opt.)

Scaling

Custom Macro B

High speed skip signal

Direct drawing dimension programming

Background editing

 BED, COLUMN, AND SADDLE:

The innovative frame structure of our vertical machining centers feature high rigidity.  The main components such as bed, columns, etc., incorporate cast iron with excellent vibration dampening and thermal characteristics for excellent rigidity and accuracy of machining.

* SPINDLE, HEADSTOCK, AND COLUMN:

The 8,000 RPM, 40 taper spindle is a true cartridge type unit supported by precision class bearings that are permanently grease lubricated.  The spindle is driven by a high torque 21 HP (30 min.)  A.C. motor delivering an impressive 142ft/lbs.  Power is transferred through a heavy-duty cogged drive belt eliminating slippage, promoting thermal stability, and minimizing vibration. An encoder is attached to the spindle to allow rigid tapping.

* GUIDEWAYS:

The rapid speeds for X/Y/Z are 32/32/30 meters/minute. This is due to the incorporation of linear guideways, which minimizes non-cutting time, thus improving machining efficiency.

* AUTOMATIC TOOL CHANGER:

* Fast random access double arm tool changer with 24 Positions featuring a quick 1.9 second tool change time (Tool to Tool)

* BALL SCREWS AND AXIS DRIVES:

Each axis is driven by a high precision double-nut ballscrew.  The ballscrews are centered between the guideways.  The ballscrews are supported on both ends by angular contact thrust bearings.  This double pretension design provides outstanding positioning repeatability with virtually no thermal growth.  All axes have large diameter 1.57" ball screws that are connected directly to Fanuc A.C. servo drive motors without gears or belts, to eliminate backlash.  Each axis has a flexible coupling to protect the ball screw in the event of a sudden impact.  These couplings can be quickly reset.

* PORTABLE MANUAL PULSE GENERATOR:

The hand held “Manual Pulse Generator” lets each axis move in increments of 0.0001”, 0.0010” or 0.0100” making fixture or part alignment quick and easy.  The 10-foot cord gives full access to the machine and the magnetic back allows for (1) handed operation with the “MPG” being conveniently held in place on the machine table or guarding.

* PROGRAM AND DATA PROTECTION KEY SWITCH:

The keyed switch enables the protection mode for both the program and offset data.  Removing the key limits access to only authorized personnel.  In the unprotected position the key can not be removed and all data is available for edit.

* FULLY ENCLOSED GUARDING:

The fully enclosed guarding is made of heavy gauge sheet metal to contain both chips and coolant.  The large dual sliding doors open to provide unrestricted overhead access for ease of lifting heavy fixtures or work pieces.

* CHIP DISPOSAL AND COOLANT SYSTEM:

High volume coolant system washes chips down into the front mounted conveyor. A separate pump provides flood coolant through adjustable spindle mounted nozzles.